1-Channel circuit breaker communicative EasyB

Version EB-1824-100-0
Input rated voltage 24 Vdc Output rated current 10 A
Version Input rated voltage Output rated current
EB-0824-100-0 24 Vdc 0.5 - 10 A, adjustable (0,5A, 1A, 2A, 3A, 4A, 5A, 6A, 8A, 10A)
EB-0824-100-4 24 Vdc 0.5 - 10 A, adjustable (0,5A, 1A, 2A, 3A, 4A, 5A, 6A, 8A, 10A)
EB-1824-010-0 24 Vdc 1 A
EB-1824-020-0 24 Vdc 2 A
EB-1824-030-0 24 Vdc 3 A
EB-1824-040-0 24 Vdc 4 A
EB-1824-060-0 24 Vdc 6 A
EB-1824-080-0 24 Vdc 8 A
EB-1824-100-0 24 Vdc 10 A
EB-3824-100-0 24 Vdc 0,5 - 10 A, adjustable (0,5A, 1A, 2A, 3A, 4A, 5A, 6A, 8A, 10A)

Technical Data for EB-1824-100-0

Input rated voltage 24 Vdc
Input voltage range 18 - 30 Vdc
Maximal residual ripple of supplied input voltage 3 %
Max. total input current 10 A
Max. input current for each pole of terminal 10 A (-), 40 A (+)
Required input voltage for turning-on of outputs 17.5 Vdc (Turn-off Threshold 16.7 Vdc),
± 0.7 Vdc
Max. power losses 2,5 W
Over voltage protection Suppressor diode 33 Vdc
Stand-by current 39 mA @ 24 Vdc
Power losses in stand-by mode 1,17 W @ 24 Vdc
Turn on capacity 70 mF @ 24 Vdc / 2,5 mm² / 2,5 m
Output rated voltage 24 Vdc
Maximum voltage drop between input and output 130 mV
Initialization time of module 52 ms
Turn-on delay of outputs min. 50 ms / max. 5 s
Waiting periode after switch-off of an output 500 ms (Short circuit) … 5 s (Overload)
Maximum turn-on capacity for each channel 70 mF
Parallel use of outputs Not allowed
Serial use of outputs Not allowed
Resistance to reverse feed max. 35 Vdc
Output rated current 10 A
Efficiency 99 %
Output limited current typ. 12,5 A
Bus communication Read:-state (tripped, On, Off)
-set/active current
-input voltage
-firmware version/serial number
Write:-state (on, off, reset)
Status indicator LED (red, green, orange)
Signal output Output status, short circuit proof
high = Channel on, low = Channel off, fault
Signal output (ON/OFF/Reset) Reset input
Level high = min. 15 Vdc, max. 30 Vdc
Level low = min. 0 Vdc, max. 5 Vdc
Approvals cURus, cULus, DNV GL
Type of cooling Natural convection
Ambient temperature -25 °C to +60 °C
Storage temperature -13 °F … +185 °F
Derating -
Relative humidity 5 … 96 %, without condensation
Required minimum spacing (left/right) 0.00 inch
Required minimum spacing (over/under) 1.18 inch
Safety and protection
Protection index IP 20
Safety class III, without PE connection
Degree of pollution 2
Terminal and mounting
Terminals input, (spring clamp terminal) max. 16 mm²
Terminals output, (spring clamp terminal) max 2,5 mm² (1 x "+")
Terminals signalling, (spring clamp terminal) max. 2,5 mm²
Mounting position horizontal for
standard rail DIN TS35
Measures and weights
Width 0.47 inch
Height 3.90 inch
Depth 2.36 inch
Weight 0.09 lbs

Information for EasyB 1-Channel current-limiting, communicative series

General Data
  • Up to 40 fuse channels stackable side by side
  • Ambient temperature -13 °F / -25 °C to +158 °F / 70 °C
  • Common signaling output for tripped and switched off channels
  • Active current limiting
  • Protection index IP 20
  • Multi-coloured LED and status display button
  • Efficiency 99 %
  • 24 Vdc 1-channel circuit breaker system
  • Optional undervoltage shutdown in combined network
  • Additional load outputs through output expanders mountable sidewise
  • Automatic channel assignment
  • Communication via communication modules
  • Optional settings for tripping current
  • Selective load-dependent activation
  • Common reset input
  • 3 years warranty

Our recommendations for you

BLOCK product: EB-GND4
Ground module
0 V paralled terminal with 4 or 8 inputs, Input rated voltage 12/24/48 Vdc, Output rated current max. 40 A
View accessory
BLOCK product: EB-COV
Left side cover
BLOCK product: EB-IO-LINK1
Communication modules for the EasyB series
Automatic feedthrough of all signal levels, Adjustable tripping current, EasyB channels switchable individually, IO-Link
View accessory
BLOCK product: EB-BAR
Power bus bar
Current capacity up to 80 A, ,
View accessory
BLOCK product: EB-0824-100-0
1-Channel circuit breaker current-limiting, communicative
Active current limiting, With communication interface, 1-Channel, 0.5 – 10 A
View accessory
BLOCK product: EB-PMM
Output expander
For mounting on right side of EasyB circuit breaker, 24 Vdc, 24 Vdc, 10 A
View accessory