PVSL 400/24-40
Primary switched mode power supply, with Line monitor PVSL 400
Input rated voltage
3 x 400 - 500 Vac
Output rated voltage
24 Vdc
Output rated current
40.00 A
| Version | Input rated voltage | Output rated voltage | Output rated current | |
|---|---|---|---|---|
| PVSL 400/24-10 | 3 x 400 - 500 Vac | 24 Vdc | 10.00 A | |
| PVSL 400/24-10B - no longer available | 3 x 400 - 500 Vac | 24 Vdc | 10.00 A | |
| PVSL 400/24-20 | 3 x 400 - 500 Vac | 24 Vdc | 20.00 A | |
| PVSL 400/24-20B - no longer available | 3 x 400 - 500 Vac | 24 Vdc | 20.00 A | |
| PVSL 400/24-40 | 3 x 400 - 500 Vac | 24 Vdc | 40.00 A | |
| PVSL 400/24-40B - no longer available | 3 x 400 - 500 Vac | 24 Vdc | 40.00 A |
DOWNLOADS
Technical files
Instruction manual
Dimension sheet
Approvals / Manufacturer's declaration
UL 508 Listed USA (E219022)
UL 508 Listed Canada (E219022)
COC UL 508 & CSA 22.2
UL 60950-1 USA (E213214)
UL 60950-1 Canada (E213214)
COA UL 60950-1 & CSA 22.2
EU-Declaration of Conformity
Additional information
Product Change Notification Material Change
Technical data for PVSL 400/24-40
| Input | |
|---|---|
| Input rated voltage | 3 x 400 - 500 Vac |
| Input voltage range | 340 - 550 Vac (480 - 780 Vdc) |
| Input rated current (rated load) | 2 A (3 x 340 Vac) |
| Rated frequency range | 44 Hz - 66 Hz / 0 Hz |
| Starting current limiter | <30 A, NTC |
| Input fuse internal | 3 x 3.2 A (slow-blow) |
| Recommended back-up fuse (circuit breaker) | 10 A, 16 A, characteristics B, C |
| Harmonic correction | passive |
| Mains buffering (rated load) | 15.6 / 42.9 ms (400 / 500 Vac) |
| Transient surge voltage protection | Varistor |
| Output | |
|---|---|
| Output rated voltage | 24 Vdc |
| Output voltage range | 22.8 - 28.8 Vdc |
| Resistance to reverse feed max. | 35 Vdc |
| Output rated current | 40.00 A |
| Parallel connection | Yes |
| Power Boost | 60 A / 4 s (50 A / 8 s) |
| Overload behaviour | Constant current or fuse |
| Efficiency | typ. 93.1 % |
| Ripple factor | typ. 70 mVss |
| Top Boost | 100 A / 50 ms |
| Signaling | |
|---|---|
| Power Good (DC OK) | LED green, LED red, LED yellow |
| Active signal outputs | 4 x 24 Vdc, 2 configurable |
| Stand-by-input | No |
| Display, interface | Yes, RS 232 |
| Approvals | |
|---|---|
| Approvals | cURus, cULus |
| Environment | |
|---|---|
| Ambient temperature | -25° C to +55° C |
| Storage temperature | -25 °C to +85 °C |
| Derating | -5 %/K > +50 °C |
| Safety and protection | |
|---|---|
| Protection index | IP 20 |
| Safety class | I, with PE connection |
| Terminal and mounting | |
|---|---|
| Terminals input, (spring clamp terminal, pluggable) | max. 2.5 mm² |
| Terminals output, (spring clamp terminal, pluggable) | max. 10 mm² |
| Terminals signalling, (spring clamp terminal, pluggable) | max. 0.5 mm² |
| Mounting position | vertical |
| Fixing method | DIN Rail system TS35 |
| Measures and weights | |
|---|---|
| Width | 128 mm |
| Height | 127 mm |
| Depth | 205.5 mm |
| Weight | 3.03 kg |
| Accessory | |
|---|---|
| Connector for signalling | PV-CON (optional) |
| Adapter cable for interface | PV-KOK2 (optional) |
| Side DIN rail mounting | PV-TS35M (optional) |
| Direct screw fastening plate for lateral mounting | PV-WB2 (optional) |
Info on PVSL 400 series
General Data
- Output rated current 10 - 40 A
- Efficiency up to 94 %
- Ambient temperature -25 °C to +70 °C
- Output rated voltage 24 Vdc
- Input rated voltage 3 x 400 - 500 Vac
- Protection index IP 20
Benefits
- RS-232 interface
- 3 LEDs and active signal outputs to indicate operating status
- Top Boost to trip conventional circuit breakers
- LCD
- Power input monitoring
- Up to 200 % Real Power Boost for 4 seconds
- Stabilised and adjustable output voltage
- Output current and output voltage monitoring
- Parallel connection option
- Service-friendly spring-loaded connector system
- Panel installation on mounting rails