Safety isolating transformer
EVKE 100/24
Characteristics
General data
Sicherheitstransformatoren der Baureihe EVKE dienen der sicheren galvanischen Trennung des Primärstromkreises vom Sekundärstromkreises und wurden nach EN (IEC) 61558-2-6 gefertigt. Durch die Begrenzung der Ausgangsspannung sind die Transformatoren für den Aufbau von SELV und PELV Stromkreisen geeignet.
Benefits
› Integrated short-circuit and overload protection
› Excellent moisture protection and low noise emission thanks to XtraDenseFill resin encapsulation
› Very high protection class
› Plastic screw connections on terminals
| Product | Safety isolating transformer |
| Order number | EVKE 100/24 |
| Series | EVKE |
| Power | 100 VA |
| Input | 230 V |
| Output | 24 V • 4.17 Aac |
| Phases | 1 |
| Frequency range | 50 Hz to 60 Hz |
| EN Insulation class | E (120°C) |
| Duty Cycle | 100 % |
| Wire material | Copper |
General
| Short circuit proof | conditionally short-circuit proof |
| Switching group | Ii0 |
| Cooling type | AN |
Environment
| Ambient temperature | -20 °C to 40 °C / -4 °F to 104 °F |
| Max. installation height | 2,000 m / 6,562 ft |
Protection and Safety
| Protection type | IP65 |
| Protection class (prepared) | II |
| Overvoltage category | III |
| Degree of contamination | 2 |
Electrical Connections
| Input terminal | Screw terminal |
| Output terminal | Screw terminal |
Size and Weight
| Width | 145 mm / 5.71 in |
| Height | 90 mm / 3.54 in |
| Depth | 180 mm / 7.09 in |
| Weight | 2.9 kg / 6.393 lbs |
| Low Voltage Directive | EN 61558-2-6 |
