Autotransformer
AIM 5,0/2,5
Characteristics
General data
The autotransformers of the AIM series are used for voltage adjustment without the need for galvanic isolation. The transformers are manufactured according to EN (IEC) 61558-2-13 and feature a lower weight and smaller size compared to other transformer types with separate windings.
Benefits
› Integrated short-circuit and overload protection
› Very high efficiency
› Excellent moisture protection and low noise emission thanks to XtraDenseFill resin encapsulation
› Screw terminal connections under cover with strain relief
| Product | Autotransformer |
| Order number | AIM 5,0/2,5 |
| Series | AIM |
| Power | 1,200 VA |
| Input | 115 V / 220 V / 230 V / 240 V |
| Output |
115 V • 5 Aac oder 220 V • 5 Aac oder 230 V • 5 Aac oder 240 V • 5 Aac |
| Phases | 1 |
| Frequency range | 50 Hz to 60 Hz |
| No-Load Losses | 11.8 W |
| EN Insulation class | A (105°C) |
| Duty Cycle | 100 % |
| Wire material | Copper |
General
| Short circuit proof | conditionally short-circuit proof |
| Switching group | Ii0 |
| Cooling type | AN |
Environment
| Ambient temperature | -20 °C to 40 °C / -4 °F to 104 °F |
| Max. installation height | 2,000 m / 6,562 ft |
Protection and Safety
| Protection type | IP20 |
| Protection class (prepared) | I |
Electrical Connections
| Input terminal | Screw terminal |
| Output terminal | Screw terminal |
Size and Weight
| Width | 117 mm / 4.61 in |
| Height | 117 mm / 4.61 in |
| Depth | 223 mm / 8.78 in |
| Weight | 5 kg / 11.023 lbs |
| Low Voltage Directive | EN 61558-2-13 |
Conrad Electronic SE
Product link
