Control- and safety isolating transformer
STSU 2500/24 - Discontinued types – not for new designs
Characteristics
Benefits
› Dual input voltage 230 and 400 Vac
› Quick to cable up thanks to the use of screw terminals
› Very good switch-on behaviour thanks to reduced starting currents
› Up to 250 VA with combination footplate for bolted and rail mounting
› Very good corrosion protection and low noise thanks to BLOCK IMPEX vacuum impregnation
› Contact protected screw connection terminals complying with UVV BGV A3
› Simple mounting due to robust metal footplate with oval slots
› 63 - 250 VA with combination footplate for bolted and rail mounting
› Primary side ±15 V tappings for voltage adjustment
| Product | Control- and safety isolating transformer |
| Order number | STSU 2500/24 |
| Series | STSU |
| Power | 2,500 VA |
| Input | 230 V / 400 V ± 15 V |
| Output | 2 x 12 V • 104 Aac |
| Phases | 1 |
| Frequency range | 50 Hz to 60 Hz |
| Short-Circuit Losses | 65 W |
| No-Load Losses | 27 W |
| Short-Term Power / instantaneous output | 12,400 VA |
| Short circuit voltage uk | 2.9 % |
| EN Insulation class | B (130°C) |
| UL Insulation class | class 130 |
| Duty Cycle | 100 % |
| Wire material | Copper |
| Efficiency | 96.5 % |
General
| Short circuit proof | not short-circuit proof |
| Switching group | Iii0 |
| Shield winding | Yes |
| Cooling type | AN |
Environment
| Ambient temperature | -20 °C to 40 °C / -4 °F to 104 °F |
| Max. installation height | 2,000 m / 6,562 ft |
Protection and Safety
| Protection type | IP00 |
| Protection class (prepared) | I |
| Overvoltage category | III |
| Degree of contamination | 1 |
Electrical Connections
| Input terminal | Screw terminal |
| Output terminal | Screw terminal |
| Terminal PE | Screw terminal |
Size and Weight
| Width | 192 mm / 7.56 in |
| Height | 235 mm / 9.25 in |
| Depth | 190 mm / 7.48 in |
| Weight | 26.3 kg / 57.982 lbs |
| Low Voltage Directive |
EN 61558-2-2 EN 61558-2-6 |
| Approval cURus - Recognized | UL 5085-1/-2; CSA 22.2 |
