PM-2824-120-0 - Discontinued items - no longer available

Download data sheet

Characteristics

› Selective immediate switch off of defective circuits in the event of critical supply voltage

› Sequential and load-dependent switching-on of channels

› Comprehensive single-channel-diagnostics and remote switching on/off of each output channel via 2-wire-interface

› Group alarm contact

› 3 years warranty

Successor item

Technical Data

Product	2-Channel circuit breaker
Order number	PM-2824-120-0

Rated input voltage	24 Vdc
Input voltage range	18 Vdc to 30 Vdc
Max. continuous current of the module	12 A
Max. continuous current feed terminal (+)	40 A
Überspannungsschutz	Suppressordioden
Max. ripple of the feeding input voltage	3 %
Switch-on threshold	20.00 V

Rated output voltage	24 Vdc
Rated Output Current	6 A
Rated Output Current per Output Channel	6.0 A
Output voltage range	24 Vdc
Number of Output Channels	2
Switch-off threshold	18 V
Max. voltage drop between input and output	145 mV
Max. power loss	2.5 W @ 2 x 6 A
Max. waiting time after switching off an output after an overload (thermal relaxation)	20 s
Idle current @ 24 V	32 mA
Max. feedback resistance	35 Vdc
Power losses in stand-by mode	0.77 W
Efficiency	99 %
Parallel connection of outputs	Not allowed
Series connection of outputs	Not allowed
Release Characteristics	Active current limiting

Signal output S2	24 Vdc, max. 25 mA (status output channels)
Signal output S3	24 Vdc, max. 25 mA (Common signalling output)
Status display	Green, yellow, red LED

Conditions

Climate class according to EN 60721	3K3
Ambient temperature	-25 °C to 70 °C / -13 °F to 158 °F
Storage Temperature	-25 °C to 85 °C / -13 °F to 185 °F
Humidity without condensation	5 % to 96 %
Cooling type	natural convection
Required minimum distance (side)	0 mm
Required minimum distance (top/bottom)	40 mm

Degree of pollution	2
Protection class according to EN 61140	III, without PE connection
Safety extra low voltage (SELV/PELV)	IEC 60364-4-41 (DIN VDE 0100-410)