EB-2724-2040-0

2-Channel circuit breaker, EasyB

Version EB-2724-2040-0
Input rated voltage 24 Vdc Output rated current 2 x 2 A
Version Input rated voltage Output rated current
EB-2724-2020-0 24 Vdc 2 x 1 A
EB-2724-2040-0 24 Vdc 2 x 2 A
EB-2724-2060-0 24 Vdc 2 x 3 A
EB-2724-2080-0 24 Vdc 2 x 4 A
EB-2724-2120-0 24 Vdc 2 x 6 A
EB-2724-2160-0 24 Vdc 2 x 8 A

Technical data for EB-2724-2040-0

Input
Input rated voltage 24 Vdc
Input voltage range 18 - 30 Vdc
Maximal residual ripple of supplied input voltage 3 %
Max. total input current 4 A
Max. input current for each pole of terminal 10 A (-), 40 A (+)
Required input voltage for turning-on of outputs 17.5 V (Turn-off Threshold 16.7 V),
± 0.7 V
Max. power losses 0,4 W
Over voltage protection Suppressor diode 33 V
Stand-by current 12 mA @ 24 V
Power losses in stand-by mode 0,3 W @ 24 V
Turn on capacity 80 mF @ 24 Vdc / 2,5 mm² / 2,5 m
Output
Output rated voltage 24 Vdc
Output rated current 2 x 2 A
Maximum voltage drop between input and output 29 mV
Initialization time of module 27 ms
Turn-on delay of outputs 0 ms
Waiting periode after switch-off of an output 500 ms (Short circuit) … 5 s (Overload)
Maximum turn-on capacity for each channel 50 mF
Parallel use of outputs Not allowed
Serial use of outputs not allowed
Resistance to reverse feed max. 35 Vdc
Efficiency 99.0 %
Output limited current -
Signaling
Bus communication Collective notification signal
Status indicator LED (red, green, orange)
Signal output Output status, short circuit proof
high = Channel on, low = Channel off, fault
Signal output (ON/OFF/Reset) -
Environment
Type of cooling Natural convection
Ambient temperature -25 °C … +70 °C
Storage temperature -25 °C … +85 °C
Derating -
Relative humidity 5 … 96 %, without condensation
Required minimum spacing (left/right) 0 mm
Required minimum spacing (over/under) 30 mm
Safety and protection
Protection index IP 20
Safety class III, without PE connection
Degree of pollution 2
Terminal and mounting
Terminals input, (spring clamp terminal) max. 16 mm²
Terminals output, (spring clamp terminal) max 2,5 mm² (2 x "+")
Terminals signalling, (spring clamp terminal) max. 2,5 mm²
Mounting position horizontal for
standard rail DIN TS35
Measures and weights
Weight 0.039 kg
Width 12 mm
Height 99 mm
Depth 64 mm

Info on EasyB 2-Channel thermomagnetic series

General Data
  • Efficiency up to 99 %
  • Multi-coloured LED and status display button
  • Up to 40 fuse channels stackable side by side
  • Ambient temperature -25 °C … +55 °C / +70 °C
  • Protection index IP 20
  • With thermomagnetic characteristic
Benefits
  • 3 years warranty
  • Compact design - 2 independent channels in 12 mm width
  • Automatic channel assignment
  • Additional load outputs through output expanders mountable side by side

Our recommendations for you

BLOCK product: EB-GND4
EB-GND4
Ground module
0 V collective terminal with 4 or 8 inputs, Input rated voltage 12/24/48 Vdc, Output rated current max. 40 A
to accessory part
BLOCK product: EB-COV
EB-COV
Left side cover
BLOCK product: EB-BAR
EB-BAR
Cross connection
Current capacity up to 80 A, ,
to accessory part
BLOCK product: EB-2724-020-0
EB-2724-020-0
1-Channel circuit breaker thermomagnetic
Preset tripping current, Thermomagnetic characteristic, 1-Channel, 1 – 10 A
to accessory part
BLOCK product: EB-0824-100-0
EB-0824-100-0
1-Channel circuit breaker current-limiting, communicative
Active current limiting, With communication interface, 1-Channel, 0.5 – 10 A
to accessory part
BLOCK product: EB-PMM
EB-PMM
Output expander
For mounting on right side of EasyB circuit breaker, 24 Vdc, 24 Vdc, 10 A
to accessory part