TTMS 5000/230
Isolating transformer for supply of medical rooms TTMS
Version TTMS 5000/230
Rated input voltage
230 Vac
Rated output voltage
115/230 Vac
Power
5,000 VA
| Version | Rated input voltage | Rated output voltage | Power | |
|---|---|---|---|---|
| TTMS 3150/230 | 230 Vac | 115/230 Vac | 3,150 VA | |
| TTMS 4000/230 | 230 Vac | 115/230 Vac | 4,000 VA | |
| TTMS 5000/230 | 230 Vac | 115/230 Vac | 5,000 VA | |
| TTMS 6300/230 | 230 Vac | 115/230 Vac | 6,300 VA | |
| TTMS 8000/230 | 230 Vac | 115/230 Vac | 8,000 VA |
Technical Data for TTMS 5000/230
| Input | |
|---|---|
| Rated input voltage | 230 Vac |
| Low-inrush current | ≤12 x INom |
| Rated frequency | 50 - 60 Hz |
| Output | |
|---|---|
| Rated output voltage | 115/230 Vac |
| Power | 5,000 VA |
| Short circuit voltage | ≤3 % |
| No-load current | ≤3 % |
| Efficiency | 97 % |
| Environment | |
|---|---|
| Ambient temperature max. | 104.0 °F |
| Safety and protection | |
|---|---|
| Type | Open type |
| Insulation class | B |
| Protection index | IP 00 |
| Safety class (prepared) | II |
| Short circuit strength | non-short-circuit proof |
| Test voltage | 3.75 kVac |
| Terminal and mounting | |
|---|---|
| Fixing screws | M8 |
| Terminals | Screw-type terminal 10 mm², Screw-type terminal 4 mm² |
| Fixing method | Fixing rail |
| Measures and weights | |
|---|---|
| Width | 12.20 inch |
| Height | 15.55 inch |
| Depth | 7.87 inch |
| Weight | 132.28 lbs |
Information for TTMS series
General Data
- Rated power 3,150 - 8,000 VA
- Rated input voltage 230 Vac
- Rated output voltage 115 and 230 Vac
- Insulation class B
- Maximum ambient temperature 104 °F / 40 °C
- Efficiency up to 97 %
- Degree of protection IP 00
- Optionally adapted package for higher degrees of protection
Benefits
- PTC resistor built into every coil to set up an external monitoring unit for protection against overload
- High efficiency
- Simple mounting thanks to robust metal mounting brackets with 8 slots
- Safe galvanic isolation
- Very low idle current
- Low short-circuit voltage
- Reduced inrush current
- Contact protected screw connection terminals complying with UVV BGV A3
- Very good corrosion protection and low noise due to BLOCK IMPEX vacuum impregnation