Control- and isolating transformer
USTE 2500/2x115
Characteristics
Benefits
› Universal input voltages 208 to 600 Vac
› Very good switch-on behaviour thanks to reduced starting currents
› High power density due to a compact construction design
› Very good corrosion protection and low noise thanks to BLOCK IMPEX vacuum impregnation
› Quick to cable up thanks to the use of spring-clamp terminals
› Contact protected screw connection terminals complying with UVV BGV A3
› Simple mounting thanks to robust metal footplate with oval slots
| Product | Control- and isolating transformer |
| Order number | USTE 2500/2x115 |
| Power | 2,500 VA |
| Input | 208 V / 230 V / 380 V / 400 V / 415 V / 440 V / 460 V / 480 V / 500 V / 525 V / 550 V / 575 V / 600 V |
| Output | 2 x 115 V • 10.8 Aac |
| Frequency range | 50 Hz to 60 Hz |
| Short-Circuit Losses | 62 W |
| No-Load Losses | 63 W |
| Short-Term Power / instantaneous output | 12,500 VA |
| Short circuit voltage uk | 2.70 % |
| EN insulation class | B (130°C) |
| UL Insulation class | class 130 |
| Duty Cycle | 100 % |
| Wire material | Copper |
| Efficiency | 95.2 % |
General
| Short circuit proof | not short-circuit proof |
| Switching group | IIii0 |
| Cooling type | AN |
Enviroment
| Ambient temperature | -20 °C to 40 °C / -4 °F to 104 °F |
| Max. installation height | 2,000 m / 6,562 ft |
Protection and safety
| Protection type | IP 00 |
| Protection class (prepared) | I |
| Overvoltage category | III |
| Degree of contamination | 1 |
Electrical Connections
| Terminal Pri | Push-in terminal |
| Terminal Sec | Push-in terminal |
| Terminal PE | Flat plug connection |
Size and Weight
| Width | 192 mm / 7.56 in |
| Height | 183 mm / 7.2 in |
| Depth | 189 mm / 7.44 in |
| Weight | 28.7 kg / 63.27 lbs |
| Low Voltage Directive |
EN 61558-2-2 EN 61558-2-4 |
| Approval cULus - Listed | UL 5085-1/-2; CSA 22.2 |
