STEU 160/23

Control- and isolating transformer

Version STEU 160/23

Rated input voltage 230/400 Vac Rated output voltage 2 x 115 Vac Rated power VDE (DB cos phi=1) 160 VA

Version	Rated input voltage	Rated output voltage	Rated power VDE (DB cos phi=1)
STEU 20/23	230/400 Vac	2 x 115 Vac	20 VA
STEU 20/24	230/400 Vac	2 x 12 Vac	20 VA
STEU 63/24	230/400 Vac	2 x 12 Vac	63 VA
STEU 63/48	230/400 Vac	2 x 24 Vac	63 VA
STEU 63/23	230/400 Vac	2 x 115 Vac	63 VA
STEU 100/24	230/400 Vac	2 x 12 Vac	100 VA
STEU 100/48	230/400 Vac	2 x 24 Vac	100 VA
STEU 100/23	230/400 Vac	2 x 115 Vac	100 VA
STEU 160/24	230/400 Vac	2 x 12 Vac	160 VA
STEU 160/48	230/400 Vac	2 x 24 Vac	160 VA
STEU 160/23	230/400 Vac	2 x 115 Vac	160 VA
STEU 250/24	230/400 Vac	2 x 12 Vac	250 VA
STEU 250/48	230/400 Vac	2 x 24 Vac	250 VA
STEU 250/23	230/400 Vac	2 x 115 Vac	250 VA
STEU 320/24	230/400 Vac	2 x 12 Vac	320 VA
STEU 320/48	230/400 Vac	2 x 24 Vac	320 VA
STEU 320/23	230/400 Vac	2 x 115 Vac	320 VA
STEU 400/24	230/400 Vac	2 x 12 Vac	400 VA
STEU 400/48	230/400 Vac	2 x 24 Vac	400 VA
STEU 400/23	230/400 Vac	2 x 115 Vac	400 VA
STEU 500/24	230/400 Vac	2 x 12 Vac	500 VA
STEU 500/48	230/400 Vac	2 x 24 Vac	500 VA
STEU 500/23	230/400 Vac	2 x 115 Vac	500 VA
STEU 630/24	230/400 Vac	2 x 12 Vac	630 VA
STEU 630/23	230/400 Vac	2 x 115 Vac	630 VA
STEU 630/48	230/400 Vac	2 x 24 Vac	630 VA
STEU 800/24	230/400 Vac	2 x 12 Vac	800 VA
STEU 800/48	230/400 Vac	2 x 24 Vac	800 VA
STEU 800/23	230/400 Vac	2 x 115 Vac	800 VA
STEU 1000/24	230/400 Vac	2 x 12 Vac	1,000 VA
STEU 1000/48	230/400 Vac	2 x 24 Vac	1,000 VA
STEU 1000/23	230/400 Vac	2 x 115 Vac	1,000 VA
STEU 1600/23	230/400 Vac	2 x 115 Vac	1,600 VA
STEU 2000/23	230/400 Vac	2 x 115 Vac	2,000 VA
STEU 2500/23	230/400 Vac	2 x 115 Vac	2,500 VA

DOWNLOADS

Technical files Data sheet CAD/CAE data 3D-CAD-Model (STEP) ePlan Makro

Technical Data for STEU 160/23

Input
Rated input voltage	230/400 Vac
Tappings Input	±15 V
Rated frequency	50 - 60 Hz

Output
Rated output voltage	2 x 115 Vac
Rated power VDE (DB cos phi=1)	160 VA
Rated power VDE (KB cos phi=0.5)	490 VA
No-load voltage (app. x factor)	1.10
Efficiency	86 %

Standards
Classification	Control- and isolating transformer

Approvals
Approvals	cURus

Environment
Ambient temperature max.	104.0 °F
Type of cooling	self-cooling

Safety and protection
Type	Open type
Insulation class	VDE=B, UL=class 130
Protection index	IP 00
Safety class (prepared)	I
Short circuit strength	non-short-circuit proof

PRI Fusing recommendation by circuit breaker with tripping characteristic type 20 x Irated related to set)
Setting range 230 ±15 Vac	0.63 - 1.00 A
Setting value 230 ±15 Vac	0.8 A
Setting range 400 ±15 Vac	0.40 - 0.63 A
Setting value 400 ±15 Vac	0.46 A

Terminal and mounting
Fixing method	Dual purpose base plate also for installation on mounting rails
Fixing screws	M5
Terminals Input	push-in terminals, 4 mm²
Terminals Output	push-in terminals, 4 mm²
Connection type	Tab connector, 6.3 x 0.8 mm

Measures and weights
Depth	4.53 inch
Height	4.21 inch
Width	3.78 inch
Weight	6.39 lbs

Information for STEU series

General Data

Insulation class B
Degree of protection IP 00
Efficiency up to 94 %
Maximum ambient temperature 104 °F / 40 °C
Rated power 63 - 2,500 VA
Rated output voltage 24 - 230 Vac
Rated input voltage 230 and 400 Vac

Benefits

Fast installation because of the use of push-in terminals
High power density due to a compact construction design
Dual input voltage 230 and 400 Vac
Reduced inrush current
Very good corrosion protection and low noise due to BLOCK IMPEX vacuum impregnation
Contact protected screw connection terminals complying with UVV BGV A3
Simple mounting due to robust metal footplate with oval slots
Primary side ±15 V taps for voltage adjustment
DIN rail clamp included up to 250 VA

Standards

Control transformer
to: VDE 0570 Teil 2-2, DIN EN 61558-2-2, EN 61558-2-2, IEC 61558-2-2,
UL 5085-1/-2, CSA 22.2 No.66
Isolating transformer
to: VDE 0570 Part 2-4, DIN EN 61558-2-4, EN 61558-2-4, IEC 61558-2-4, UL 5085-1/-2, CSA 22.2 No.66
Isolating transformer
to: VDE 0570 Part2-4, DIN EN 61558-2-4, EN 61558-2-4, IEC 61558-2-4, UL 5085-1/-2, CSA 22.2 No.66

Approvals

UL 5085-1/-2, CSA 22.2 No.66

Applications

As an isolating transformer for the safe electrical isolation of the input and output sides. The transformer may be used to set up protective separation as a protective measure in accordance with VDE 0100.
As a control transformer for the electrical isolation of the input and output sides. The construction of the transformer is designed to supply control systems according to EN 60204.
As a safety transformer for the safe electrical isolation of the input and output sides. The transformer is suitable for creating SELV and PELV circuits because of the limit on the output voltage.

Our recommendations for you

BGUK 2

Metal enclosures

Integrated rail system for the installation of different product sizes, Degree of protection IP 20 - IP 23, For wall and floor mounting, For Power 63 - 25,000 VA
View accessory

ST 160/23/23

Control- and safety isolating- resp. isolating transformer

Base plate, PRI 115 – 690 Vac, SEC 12 – 230 Vac, 20 – 2,500 VA
View accessory

FST 160/23

FAIL-SAFE transformer

DIN rail, PRI 230/400 Vac, SEC 24/230 Vac, 100 VA/160 VA/250 VA
View accessory

ST 160/4/23