EB-2724-2060-0F
2-Channel circuit breaker, EasyB
Input rated voltage
24 Vdc
Output rated current
2 x 3 A, NEC Class 2
| Version | Input rated voltage | Output rated current | ||
|---|---|---|---|---|
| EB-2724-2020-0F | 24 Vdc | 2 x 1 A, NEC Class 2 | ||
| EB-2724-2040-0F | 24 Vdc | 2 x 2 A, NEC Class 2 | ||
| EB-2724-2060-0F | 24 Vdc | 2 x 3 A, NEC Class 2 | ||
| EB-2724-2080-0F | 24 Vdc | 2 x 4 A, NEC Class 2 | ||
| EB-2724-2120-0F | 24 Vdc | 2 x 6 A | ||
| EB-2724-2160-0F | 24 Vdc | 2 x 8 A |
DOWNLOADS
Technical files
Manual
Instruction manual
Dimension sheet
Approvals / Manufacturer's declaration
UL 508 Listed USA (E219022)
UL 508 Listed Canada (E219022)
COC UL 508 & CSA 22.2
UL 2367 USA (E356250)
COA UL 2367 & CSA 22.2
COC UL 2367 & CSA 22.2
EAC approval
EU-Declaration of Conformity
CAD/CAE data
3D-CAD-Model (STEP)
Additional information
Brochure EasyB
eBreaker brochure
Technical Data for EB-2724-2060-0F
| Input | |
|---|---|
| Input rated voltage | 24 Vdc |
| Input voltage range | 18 - 30 Vdc |
| Maximal residual ripple of supplied input voltage | 3 % |
| Max. total input current | 2 x 3 A |
| Max. input current for each pole of terminal | 10 A (-), 40 A (+) |
| Required input voltage for turning-on of outputs | 17.5 V (Turn-off Threshold 16.7 V), ± 0.7 V |
| Max. power losses | 1,2 W |
| Over voltage protection | Suppressor diode 33 V |
| Stand-by current | 40 mA @ 24 V |
| Power losses in stand-by mode | 0,96 W @ 24 V |
| Turn on capacity | 40 mF @ 24 Vdc / 2,5 mm² / 2,5 m |
| Output | |
|---|---|
| Output rated voltage | 24 Vdc |
| Output rated current | 2 x 3 A, NEC Class 2 |
| Maximum voltage drop between input and output | 33 mV |
| Initialization time of module | 27 ms |
| Turn-on delay of outputs | 0 ms |
| Waiting periode after switch-off of an output | 500 ms (Short circuit) … 5 s (Overload) |
| Maximum turn-on capacity for each channel | 50 mF |
| Parallel use of outputs | Not allowed |
| Serial use of outputs | not allowed |
| Resistance to reverse feed max. | 35 Vdc |
| Efficiency | 99 % |
| Signaling | |
|---|---|
| Bus communication | Collective notification signal |
| Status indicator | LED (red, green, orange) |
| Signal output | Output status, short circuit proof high = Channel on, low = Channel off, fault |
| Signal output (ON/OFF/Reset) | - |
| Approvals | |
|---|---|
| Approvals | cURus, cULus |
| Environment | |
|---|---|
| Type of cooling | Natural convection |
| Ambient temperature | -13 °F … 158 °F |
| Storage temperature | -13 °F … +185 °F |
| Relative humidity | 5 … 96 %, without condensation |
| Required minimum spacing (left/right) | 0.00 inch |
| Required minimum spacing (over/under) | 1.18 inch |
| Safety and protection | |
|---|---|
| Protection index | IP 20 |
| Safety class | III, without PE connection |
| Degree of pollution | 2 |
| Terminal and mounting | |
|---|---|
| Terminals input, (spring clamp terminal) | max. 16 mm² |
| Terminals output, (spring clamp terminal) | max 2,5 mm² (2 x "+") |
| Terminals signalling, (spring clamp terminal) | max. 2,5 mm² |
| Mounting position | horizontal for standard rail DIN TS35 |
| Measures and weights | |
|---|---|
| Weight | 0.09 lbs |
| Width | 0.47 inch |
| Height | 3.90 inch |
| Depth | 2.36 inch |
Information for EasyB 2-Channel thermomagnetic, adjusted internal fuse series
General Data
- Protection index IP 20
- Efficiency 99 %
- Multi-colored LED and status display button
- Up to 40 fuse channels stackable side by side
- With thermomagnetic characteristic
- Ambient temperature -13 °F / -25 °C … +131 °F/ +55 °C / +158 °F / +70 °C
Benefits
- Automatic channel assignment
- Compact design - 2 independent channels in 12 mm width
- Internal fuse adapted to the tripping current
- Additional load outputs through output expanders mountable sidewise