PVSE 230/48-5

Primary switched mode power supply, Economy PVSE 230

Version PVSE 230/48-5
Input rated voltage 110 - 240 Vac Output rated voltage 48 Vdc Output rated current 5.00 A
Display options
Version Input rated voltage Output rated voltage Output rated current
PVSE 230/12-6 100 - 240 Vac 12 Vdc 6.00 A
PVSE 230/12-10 - no longer available 100 - 240 Vac 12 Vdc 10.00 A
PVSE 230/12-15 100 - 240 Vac 12 Vdc 15.00 A
PVSE 230/24-3 - no longer available 100 - 240 Vac 24 Vdc 3.00 A
PVSE 230/24-3B - no longer available 100 - 240 Vac 24 Vdc 3.00 A
PVSE 230/24-5 100 - 240 Vac 24 Vdc 5.00 A
PVSE 230/24-5B - no longer available 100 - 240 Vac 24 Vdc 5.00 A
PVSE 230/24-10 110 - 240 Vac 24 Vdc 10.00 A
PVSE 230/24-20 110 - 240 Vac 24 Vdc 20.00 A
PVSE 230/30-15 - no longer available 110 - 240 Vac 30 Vdc 15.00 A
PVSE 230/48-5 110 - 240 Vac 48 Vdc 5.00 A
PVSE 230/48-10 110 - 240 Vac 48 Vdc 10.00 A
Image of %s BLOCK Item: PVSE 230/48-5

Technical data for PVSE 230/48-5

Input
Input rated voltage 110 - 240 Vac
Input rated current (rated load) 2.5 / 1.2 Aac (110 / 230 Vac)
Input voltage range 85 - 264 Vac (120 - 373 Vdc)
Rated frequency range 44 Hz - 66 Hz / 0 Hz
Starting current limiter <8 A, active
Input fuse internal 6.3 A (slow-blow)
Recommended back-up fuse (circuit breaker) 10 A, 16 A, characteristics B, C
Mains buffering (rated load) 24 / 24 ms (110 / 230 Vac)
Transient surge voltage protection Varistor
Output
Output rated voltage 48 Vdc
Output voltage range 33 - 52 Vdc
Resistance to reverse feed max. 63 Vdc
Output rated current 5.00 A
Parallel connection Yes, for increased power with redundancy module
Power Boost 10 A / 4 s (7.5 A / 8 s)
Overload behaviour Constant current
max. Power loss idling/nominal load 7.4 / 21.6 W
Serial operation Yes
Efficiency typ. 91 %
Ripple factor typ. 70 mVss
Top Boost 30 A / 25 ms
Signaling
Stand-by-input Yes
Power Good (DC OK) LED green, LED red
Potential-free signal contact Yes
Approvals
Approvals cURus, cULus
Environment
Storage temperature -25 °C to +85 °C
Derating -3 %/K > +50 °C,
-1.5 %/Vac < 110 Vac
Ambient temperature -10 °C to +70 °C
Safety and protection
Safety class I, with PE connection
Protection index IP 20
Terminal and mounting
Terminals input, (spring clamp terminal, pluggable) max. 2.5 mm²
Terminals output, (spring clamp terminal, pluggable) max. 2.5 mm²
Terminals signalling, (spring clamp terminal, pluggable) max. 0.5 mm²
Mounting position vertical
Fixing method DIN Rail system TS35
Measures and weights
Width 57 mm
Height 127 mm
Depth 179.5 mm
Weight 1.3 kg
Accessory
Connector for signalling PV-CON (optional)
Side DIN rail mounting PV-TS35M (optional)
Direct screw fastening plate for lateral mounting     PV-WB2 (optional)

Info on PVSE 230 series

General Data
  • Input rated voltage 100 - 240 Vac
  • Output rated current 3 - 20 A
  • Ambient temperature -25 °C to +70 °C
  • Efficiency up to 92 %
  • Output rated voltage 12 - 48 Vdc
Benefits
  • Parallel connection option
  • Stabilised and adjustable output voltage
  • Top Boost to trip conventional circuit breakers
  • DC OK signalling
  • Stand-by-input
  • Service-friendly spring-loaded connector system
  • Up to 200 % Real Power Boost for 4 seconds
  • Optional with active inrush current limiter

Our recommendations for you

BLOCK product: PM-0748-400-0
PM-0748-400-0
Electronic circuit breaker with thermomagnetic characteristic
Adjustable tripping current, Thermomagnetic characteristic, 8/4/2 channel, 1 – 6 A / 2 – 10 A
to accessory part
BLOCK product: PC-0648-400-0
PC-0648-400-0
Redundancy module Power Compact
PRI 24/48 Vdc, SEC 24/48 Vdc, 40 A, Error message via relay contact and LEDs
to accessory part
BLOCK product: PC-0148-050-0
PC-0148-050-0
Single-phase, primary switched mode power supply
PRI 100 – 240 Vac, SEC 12 – 48 Vdc, 5 – 20 A, Fast tripping of conventional circuit breakers
to accessory part